FAQ

It's as easy as

FOLD – STRETCH – STACK – RELAX...

1. FOLD a complete bed sheet set (top sheet, bottom sheet and
pillowcases) in to a neat bundle - or you can roll or gather your bedding items
in to a tidy pile.

2. STRETCH the band to wrap around the middle of your
bundle. Our COVER and DUVET bands have the option to mark the size of your item
using a permanent marker.

3. STACK your newly organised bundle into your linen cupboard or storage area, with the label front facing to quickly identify your bedding bundle for their
next use.

4. RELAX – you're all done! With your neat, ordered sheets changing linen is now a breeze, leaving more time to enjoy the fun
things in life...


Sweet Dreams!

BEFORE YOU START if your label has a backing sheet, remove it. 

Make sure your label and sheet size match. Check where the sheet fits on the bottom right-hand corner of the mattress - this is the
position where your label goes on your different bed size sheets when you
follow these simple steps:

1. HEAT IRON

Set to COTTON (NOTE: Do not exceed fabric's recommended iron temperature.

Eg. DO NOT use label on silk or satin sheets). Select DRY. NO STEAM. Wait for
the iron to fully heat.

2. POSITION LABEL

Place the correct label on the bottom right corner of your clean and dry sheet.

Have the adhesive side (the blank side) touching the fabric.

3. COVER LABEL

If your iron is old without a modern

TEFLON base, cover label with kitchen baking paper (do not use wax paper).

4. IRON LABEL

Push down on label firmly for a few seconds onto your sheet, then slowly keep
pressure on while ironing over the label for another 10-12 seconds.

5. CHECK ADHESION

Lift the iron and carefully check if the label has adhered to the fabric.

If the edges are not completely bonded. repeat step 4.

6. COOL AND SET

Allow sheet to cool before moving, then leave for 24 hrs to set label before
washing... and Sweet Dreams!

We deliver world-wide.

See our returns policy here